Join our mailing list!



(Your shopping cart is empty)
You are here: Home > BAR CRADLE TRUCKS & RACKS
BAR, PIPE and ROD CRADLE TRUCKS. These Bar Cradle Trucks Transport Bars, Pipes, & Tubes Of Any Size And Length. Use one bar cradle dolly for small lengths of materials or use
multiple dollies to easily transport extra long or flexible pipes, bars and tubing. Bar cradle truck is made using all welded steel construction for strength.

(05A) Bar Cradle Trucks and carts
(10A) Cantilever Racks for Pipe & Bar Storage
Sort By:
Page of 3
88TC / Bar and Pipe Cradle Truck
88TC / Bar and Pipe Cradle Truck

Model (88TC) - BAR & PIPE CRADLE TRUCKS ; ... (PRODUCT CODE: 88TC)... Move and store pipe, channel, bar stock, barrels, or drums with these Heavy-Duty Cradle Carts and trucks. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Ergonomic 20" Bed Height, Less bending means easier loading and unloading, and keeps material closer to most machine heights. Highly Maneuverable - Four swivel casters with 6" hard tread phenolic wheels allow movement in any direction. Useful in tight work areas with long loads and when moving around corners. Up to 4,000 lbs. Capacity Each. Use for both transport and storage. Combine multiple units for greater capacity and to support longer loads. Loads on single units must be centered on truck. (1966,1967)
88TC-Bar-and-Pipe-Cradle-Truck

more info
66ERBST / Bar and Pipe Cradle Truck
66ERBST / Bar and Pipe Cradle Truck

Model (66ERBST) - BAR & PIPE CRADLE TRUCKS ; ... (PRODUCT CODE: 66ERBST)... Move and store pipe, channel, bar stock, barrels, or drums with these Heavy-Duty Cradle Carts and trucks. A large open design that makes loading and unloading by fork trucks and slings easy. Available in 3 sizes. All welded construction. Ergonomic Bed Height, Less bending means easier loading and unloading, and keeps material closer to most machine heights. Highly Maneuverable - Four swivel casters with 6" hard tread phenolic wheels allow movement in any direction. Useful in tight work areas with long loads and when moving around corners. Up to 3,000 lbs. Capacity Each. Use for both transport and storage. Combine multiple units for greater capacity and to support longer loads. Loads on single units must be centered on truck. (1966,1967)
66ERBST-Bar-and-Pipe-Cradle-Truck

more info
88CR / Bar and Pipe Cradle Truck
88CR / Bar and Pipe Cradle Truck

Model (88CR) - BAR & PIPE CRADLE TRUCKS ; ... (PRODUCT CODE: 88CR)... All welded construction (except casters). 3-Cradle or 4-Cradle trucks with 27" wide x 14" high and 3" x 3/16" thick flat load supports. 3" channel steel frame. Overall height - 28". Heavy-Duty 6" x 2" Phenolic swivel casters on the four corners and 10" phenolic wheels on 1" axels in the center allow for easy maneuverability. Casters are bolted on for ease of replacement. Powder coated gray finish standard. (1966,1967)
88CR-Bar-and-Pipe-Cradle-Truck

more info
88CT / Bar and Pipe Cradle Truck
88CT / Bar and Pipe Cradle Truck

Model (88CT) - BAR & PIPE CRADLE TRUCKS ; ... (PRODUCT CODE: 88CT)... All welded construction (except casters). 3-Cradle or 4-Cradle trucks with 27" wide x 14" high and 3" x 3/16" thick flat load supports. 4" channel steel frame. Overall height - 30". Heavy-Duty 8" x 2" Phenolic swivel casters on the four corners and 12" phenolic wheels on 1" axels in the center allow for easy maneuverability. Casters are bolted on for ease of replacement. Powder coated gray finish standard. (1966,1967)
88CT-Bar-and-Pipe-Cradle-Truck

more info
33DCC / Bar & Pipe Cradle Truck
33DCC / Bar & Pipe Cradle Truck

Model (33DCC) - BAR & PIPE CRADLE TRUCKS ; ... (PRODUCT CODE: 33DCC)... Move and store pipe, channel, bar stock, barrels, or drums with these Heavy-Duty Cradle Trucks. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turnabout on its own center. The 4,000 pound units roll on (2) rigid and (2) swivel glass filled nylon casters with the exception of the 31" truck that rolls on four (4) swivel glass filled nylon. The 10,000 pound carts roll on (2) rigid steel and (2) swivel phenolic casters. Powder coat finish standard on steel trucks. (1966,1967)
33DCC-Bar-Pipe-Cradle-Truck

more info
22BCT / Bar & Pipe Cradle Truck
22BCT / Bar & Pipe Cradle Truck

Model (22BCT) - BAR & PIPE CRADLE TRUCKS ; ... (PRODUCT CODE: 22BCT)... BAR CRADLE TRUCK For easy handling of Bar Stock, Pipe and Tubing. Framed with structural channel, this truck is as rock solid as it looks. The 3" wide cradles are supported by structural channel on the bottom and both sides. Cradles are 24" across and 13" deep to accept large bundles of stock. The 12" phenolic load wheels are known for exceptional strength and resistance to oil, gasoline and most commonly used solvents and chemicals. 8" swivel caster at each end and a "tilt pattern" permits the truck to turn in its own radius. All wheels have roller bearings. Capacities based on evenly distributed loads. Gray enamel finish. Shipped assembled. Made in USA. Note: Capacities are based upon evenly distributed loads and Not to be used on Ramps, Slopes or Inclined Surfaces. (1966,1967)
22BCT-Bar-Pipe-Cradle-Truck

more info
88TP / Bar & Pipe Transport Truck
88TP / Bar & Pipe Transport Truck

Model (88TP) - BAR & PIPE TRANSPORT TRUCKS ; ... (PRODUCT CODE: 88TP)... Rugged, all-welded construction with 3 load levels. Structural channel uprights with 1-1/2" square tube arms have 4-1/2" high stops on ends for load retention. 12-gauge steel lower deck stores and transports smaller part, packages, etc. Platform height 11", overall height 59. 8" x 2" phenolic wheels for ease of movement. Wheel brakes on all four wheels is available as an option to help prevent unwanted movement. Capacity 4000 lbs. overall, 1300 lbs. per level evenly distributed. Horizontal storage space (each side): (Top = 6.5"), (Middle = 9.5"), (Bottom = 14.5"). Available with 2 rigid and 2 swivel casters standard. Optional floor lock and wheel brakes are available. (1966,1967)
88TP-Bar-Pipe-Transport-Truck

more info
88UP / Bar & Pipe Transport Truck
88UP / Bar & Pipe Transport Truck

Model (88UP) - BAR & PIPE TRANSPORT TRUCKS ; ... (PRODUCT CODE: 88UP)... Rugged, ( 3-COLUMN ) all-welded construction with 3 load levels. Structural channel uprights with 1-1/2" square tube arms have 4-1/2" high stops on ends for load retention. 12-gauge steel lower deck stores and transports smaller part, packages, etc. Platform height 11", overall height 59. 8" x 2" phenolic wheels for ease of movement. Wheel brakes on all four wheels is available as an option to help prevent unwanted movement. Capacity 4,200 lbs. overall, 1300 lbs. per level evenly distributed. Horizontal storage space (each side): (Top = 6.5"), (Middle = 9.5"), (Bottom = 14.5"). Available with 2 rigid and 2 swivel casters standard. Optional floor lock and wheel brakes are available. (1966,1967)
88UP-Bar-Pipe-Transport-Truck

more info
66TB1 / Bar & Pipe Transport Cart
66TB1 / Bar & Pipe Transport Cart

Model (66TB1) - BAR & PIPE TRANSPORT CART ; ... (PRODUCT CODE: 66TB1)... Rugged Big 16" Wheel Cart carries a variety of loads, including lumber, tool boxes, and pipe up to 20" diameter. Extra large 16" pneumatic wheels with roller bearings and 4 ply tires roll over the roughest surfaces. Carrier bed is constructed of 3/16" plate and measures 30" long x 12" x 12". Offset "T" handle allows for 2 hand grip and greater control of load. Pipe and tubing measuring up to 20 feet long may now be easily moved by one person. The V-Groove design keeps loads at the horizontal center of gravity for maximum stability and safety. Steel welded construction. (1966,1967)
66TB1-Bar-Pipe-Transport-Cart

more info
33AFSR1 / Bar and Pipe "A"-FRAME Truck
33AFSR / Bar and Pipe "A"-FRAME Truck

Model (33AFSR) - BAR & PIPE "A"- FRAME CART ; ... (PRODUCT CODE: 33AFSR)... The portable A-Frame Cart with storage rack is ideal for storage and transporting pipe, conduit and other types of bar material. Storage arms extend 12" beyond frame with a clearance of 7.25" between arms. Unit rolls on (2) rigid and (2) swivel 5" poly-on-steel casters with brakes. Base is powder coat blue while the storage rack is zinc plated. Overall deck size is 36"Wide x 72"Long. Storage rack is 66"High with 8 storage levels. Storage arms extend 12" beyond frame. Distance between storage arms is 7.25". Maximum capacity is 2,000 lbs. Base is powder coated blue. Storage rack is zinc-plated. (1966,1967)
33AFSR1-Bar-and-Pipe-A-FRAME-Truck

more info
   
 
For easy handling of Bar Stock, Pipe and Tubing. Framed with structural channel, this truck is as rock solid as it looks. The cradles are supported by structural channel on the bottom
and both sides. Cradles accept large bundles of stock. The phenolic load wheels are known for exceptional strength and resistance to oil, gasoline and most commonly used solvents
and chemicals. Large swivel caster at each end and a "tilt pattern" permits the truck to turn in its own radius. All wheels have roller bearings. Capacities based on evenly distributed
loads. Shipped assembled. Made in USA. Note: Capacities are based upon evenly distributed loads.
www.StandardShelving.com

 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © 2008 www.standardshelving.com. All Rights Reserved.
Built with Volusion